美國進口威格士靜液傳動器，威格士靜液傳動器電子樣本

美國進口威格士靜液傳動器，威格士靜液傳動器電子樣本

企業QQ：2880626086

手機：17302157802

郵箱:17302157802@163.com  

For optimum control and power, the

transmissions should be operated at

constant input speeds. When operating the

unit under varying load conditions there can

be noticeable changes in the output speed. If

the output speed decreases due to increased

load, the shift lever should be directed

toward neutral position to increase the

output torque. This produces the same

result as shifting down to a lower gear with a

typical mechanical transmission.

Moving the control lever from neutral to

forward produces one direction of output

shaft rotation. When the lever is in neutral

position, output shaft rotation stops. 

這幅圖說明了靜液傳動器與三速齒輪傳動

器相比，其工作時的差異。平滑的曲線表

明靜液傳動器可以提供均勻匹配的扭矩和轉速。

The Model 6 transmission can include a dump

valve which, when actuated, enables the

vehicle to be pushed with the engine off.

Caution: Motor speed must not exceed 350

RPM when the valve is actuated.

齒輪傳動器僅有三個峰值功率點，而靜液

傳動器卻具有無峰值和谷值的連續曲線。

要獲得更大的扭矩，您無需停機并調轉

速，只需將控制手柄向中位處移動，則輸

出扭矩就會增大。

A single control lever connected to the pump

section controls both speed and direction of

the transmission output shaft. Infinite speed

control is achieved by varying the displacement

ratios between the pump and motor.

Movingthe lever from neutral to reverse produces

the opposite output shaft rotation from the

forward position. Output shaft speed

increases as the lever is moved from neutral.

*Axle available through Peerless Axle

Division, Tecumseh Prod. Corp., Clinton,

Michigan.

美國進口威格士靜液傳動器，威格士靜液傳動器電子樣本